When to Use 1.1kW Thruster for Yacht Stability Systems？

IntensaPulper facilitates efficient pulping of fibers from virgin pulp, recovered paper or paper machine broke in stock preparation.

You can find more information on our web, so please take a look.

The Intensa technology from Voith offers quick and intensive mixing of the suspension in the pulper. The flow-optimized pulper vat, in combination with the eccentrically arranged rotor, generates a perfect turbulence. As a result, quicker mixing of the suspension and accelerated bale intake are achieved. The double-coned bottom of IntensaPulper creates a flow-optimized transition from the pulper bottom to the cylindrical trough wall.

IntensaPulper IP-R is specifically designed for the pulping of recovered paper at a high pulping consistency. The rotor configuration ensures a reliable ragger operation, and the number of ragger breaks can be reduced to once a month. The double-coned bottom combined with the baffle urges the coarse heavy contaminants towards the reject discharge allowing a reliable removal in the Junkomat.

IntensaPulper IP-V enables efficient pulping of virgin fibers, clean recovered paper or broke in batch or continuous mode. A bale breaker divides the bales and thus contributes to an increase in production capacity. A trap for heavy parts ensures the separation of wires.

IntensaPulper from Voith achieves a significant increase in production capacity, while keeping the pulping quality consistently high. Significant energy savings of up to 25% are obtained in comparison to conventional low consistency pulpers, thus high cost savings can be achieved.

The particular orientation of the rotor-screen unit on the top of the asymmetrically shaped tank ensures that no vortices can form inside IntensaMaXX. Development of spinnings is thus successfully counteracted, and even maximum contaminant contents are not a problem. Reject discharge in a downward direction ensures reliable removal of contaminants. IntensaMaXX with rotor type B is available for high levels of contaminants; rotor type S is available for hard-to-pulp raw materials.

IntensaMaXX can be used in continuous low consistency (LC) pulping with recovered paper grades containing contaminants or in high consistency (HC) pulping as a dumping machine after the batch HC pulper.

The CompactPulper ensures reliable pulping of broke through improved rotor contact and a higher circulation rate. Thanks to its narrow and compact design, the CompactPulper requires minimal space and is used with couch and press broke and with dry broke at a pulping consistency between 3% and 6%.

An effective agitation with low vat height, together with an intensive rotor contact results in a higher circulation rate providing a more intensive pulping with simultaneous low energy consumption. The CompactPulper is available with one to four pulping units per pulper vat and with a width of up to 12 meters. Each pulping unit provides an electrical power of between 55 and 900 kW.

Haoye are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

In conjunction with the IntensaPulper IP-R, the ragger transports the tail, formed from bale wires and other coarse spinning contaminants contained in the recovered paper, from the IntensaPulper. To form a sufficiently stable tail, a sufficient quantity of contaminants, such as typically occur in the OCC raw material need to be continuously fed to the IntensaPulper IP-R.

Bale wires are necessary for the transportation of paper bales but expensive to remove upstream of the pulper, and this is not a functioning solution, because there are still spinning contaminants in the recovered paper that form huge spinnings in the pulper that can only be removed by an orange peel grapple. This is why the ragger is a simple tool for removing the spinning materials from the IntensaPulper IP-R. It ensures that the steel wires are not broken down by the rotor and then cause excessive wear on machines, valves and pumps.

Correctly positioned and in combination with the rotor of the IntensaPulper IP-R, the number of torn off tails can be reduced to a minimum. Strong ribs on the transport wheel prevent slippage.

The ragger produces 1.6 tons of tractive force with a 1.1 kW motor. During breaks in operation the brake integrated into the motor stops the transport wheel from twisting. Forward and backward transportation of the ragger is possible with push buttons. The high gear ratio allows an intermittent speed control from 10 to 300 m/h.

Underwater thruster
Model T561
Parameters
1. Rated power 1.1KW
2. Rated voltage 48-300VDC
3. Max RPM r/min
4. Thrust: 18kg forward; 10 kg reverse
5. Propeller handing: left&right
6. Propeller material: stainless steel
7. Housing: Aluminum&Titanium alloy
8. Depth rating: 0-850m; 0-m;0-m;0-m;full ocean depth;service depth>m, oil-filled seal
9. Singal power: Supply voltage is 12VDC(+-5%), >=200MA
10.Control made:Anolog voltage control(0~+5Vforward, 0~-5V reverse)
11. RPM feedback: pulse feedback; Anolog voltage feedback
12. Temperature: Storage temperature:-40~70ºC  Service temperature: -5~40ºC
13. Electronics: built-in; external

Tianjin Haoye Technology Co., Ltd. was founded in . It is a private science and technology company mainly engaged in R&D, producing and selling underwater thrusters, underwater rotary actuators, special motors etc. It also provides users with complete electronic control solutions such as motor drive and precise design and processing services for mechanical components such as propellers, we have own R&D department to design project, professional produce equipment and test pool, five-axis machining center, every detail to ensure the stability and long life of products. Enterprise vision is to be a leader in the core supporting field of high-end intelligent equipment.

1. We have installed power isolation, overcurrent protection and overheat protection for the built-in drivers. A ramp linear processing is performed on the control signal. These two upgrades allow the thruster to switch directions frequently and quickly. And voltage fluctuations +-15% will not cause any harm to the thruster. Makes the thruster has long-life.
2.We use alloy bearings with water lubricating effect, which are very advantageous in terms of wear resistance and quality.
3.Our thruster adopt magnetically coupled drive technology, is the one that magnet array fitted inside the propeller hub is driven by the one attached inside the housing of the thruster, so as to realize non-contact and leak-free transmission of torque. magnetically coupling structure will produce ratchet effect in case of overload, to prevent the damages caused by objects jammed into the propeller.
4.Not only we have capacity from R&D to produce, but also we have professional test pool, which simulate real marine environment, adding sand and shells, we test them before each model is molded, one-time charging for thrusters, uninterruptible power supply, running at full power for more than 1,000 hours. The total time of fatigue test and other tests reaches hours.
5. We have a professional five-axis machining center, propeller integrated molding. It is SS material.

Q: Are you a factory?
A: Yes, we are manufacture and we hava our capacity of R&D, produce, test etc..

Q: Do you provide custom service?
A: Yes, our thrusters are serialized, We can also be custom-made to suit your own requirements.

Q: Can we order one set as sample?
A: Of course. MOQ is one set.

Q: If there is problem when we use the goods, how can we do?
A: First of all, please contact us in time, send videos and pictures for us, so that we can judge the problem and find the reason. We will guide you to debug and repair by video conference or . If you can't solve it, please send the product to us in time, and we will repair immediately and send it back to you as soon as possible. For other content, please refer to after-sales service.

Q: Do you have overseas agent?
A: Yes, now we have agent in Singapore, Canada, Australia. We'd like to cooperate with powerful and intentional customers.
 

For more information, please visit 1.1kW Thruster for Yacht Stability Systems.