综合7
Your Position: Home - Minerals - Why is the wire broken when using stainless steel wire mesh?
Guest Posts

Why is the wire broken when using stainless steel wire mesh?

Mar. 28, 2022

We know that stainless steel wire mesh is generally used in acid, alkali, and high temperature environments. If the stainless steel wire mesh is interrupted during use, it is absolutely not allowed. Today, we will analyze the reasons for the broken wires of the stainless steel wire mesh. As a Stainless Steel Wire Mesh Supplier, share with you. what are the reasons for the broken wire of stainless steel wire mesh in production?

Different kinds of wire mesh and also their applications



1. Errors in the size adjustment of the mold on the machine will cause the normal compression ratio to be confused during the knitting process, and cause wire breakage. The solution is to ensure the absolute size of the mold on the machine.

2. The oil or water is interrupted during the mold on-machine process, which causes the mold to run a large hole distance in a short time, and the compression ratio is out of adjustment, which causes the wire to break. The solution is to add lubricant to each mold in time to ensure its cooling and lubrication.

3. When wicker filaments appear during the weaving process, excessively fast take-up speed will cause the stainless steel wire mesh to break. The only solution is to replace the mold to ensure that the phenomenon of wicker silk does not occur again.

4. A certain piece of natural path in the mold is too fast, causing the compression ratio of the front and back in the knitting to be out of balance, and the broken wire appears, mainly as several broken wires in one position. The solution is to replace the mold, adjust the compression ratio before and after, until it is normal.

When the wicker wire is presented during the weaving process, the wire take-up speed will be too fast to form a stainless steel mesh broken wire. The treatment method is to transform the mold to ensure that the phenomenon of wicker wire no longer occurs. Therefore, the structure of the stainless steel wire mesh does not seem to be very messy, it is indeed mixed with the sweat of many dark mesh workers and the delicate production process of technical personnel. In the production process, various problems will be presented, all of which require the operation of technical personnel to prevent unnecessary problems. The above are some superficial views of stainless steel wire mesh broken wires. Customers are welcome to pay attention to them.

The way to clean the stainless steel Wen Wen is to simply scrub the surface with hot water and a clean soft cloth, and then use dry metal and other soft cloths to avoid water spots completely. I was surprised by the amount of dirt on the surface, just this step. When applying this or any other method, keep in mind that stainless steel has "grains" that run in one direction with fine grooves on the entire surface of the metal and its grains. Rather than scrub it clean. Some people will tell you that this is to avoid scratching the metal or dust particles in the accommodation, where they can cause rust formation. This is probably true, but scrubbing seems simpler and more useful.

The above is the analysis result of the broken wire of the stainless steel wire mesh. If you want to know more, please contact us.


Comments

0 of 2000 characters used

All Comments (0)
Get in Touch