综合7
Your Position: Home - Machinery - Components of horizontal lathe tool holders
Guest Posts

Components of horizontal lathe tool holders

The device holder consists of the complying with parts:

Bed saddle: It is gotten in touch with the slide box and also can be relocated longitudinally along the bed rails, with horizontal rails on it.

Center slide: It can move horizontally along the overview rail on the saddle.

Turntable: It is fastened with the middle slide plate with screws, and also it can be turned at any angle in the horizontal airplane by loosening the screws.

Tiny skateboard: It can move a brief range along the overview rail on the turntable; when the turntable is dispersed by a certain angle, the little skateboard can be made use of to feed diagonally to facilitate the conical surface area.

Square tool holder: It is fixed on a little gliding plate and also can clamp four transforming devices at the same time; loosen the securing manage, you can turn the square tool holder and also replace the needed turning tools to the working position.

Tail stock: The tail supply is utilized to install the rear facility to sustain the work piece, or mount drills, reamers, as well as other tools for hole handling. The framework of the tail stock is shown in Figure 3. It is mainly made up of a sleeve, a tail supply body, and also a base. By transforming the hand wheel, the sleeve can be gotten used to a certain range, and also the tail stock can likewise be relocated to the called for position along the bed rail to fulfill the needs of different job item processing.

Bed: The bed is fixed on the legs of the bed. The bed is the fundamental support of the lathe. The feature of the bed is to support the primary elements as well as maintain them in an accurate loved one position during job.

Lead screw: The lead screw can drive the large carriage to relocate longitudinally for turning strings. The lead screw is one of the primary precision components in the lathe. Typically, the lead screw is not automatically fed to keep the precision of the lead screw for a long period of time.

Light bar: Light bar is made use of to transfer movement throughout a mechanized feed. The motion of the feed box can be transmitted to the slide box with the light bar to ensure that the tool holder can make longitudinal or horizontal feed activity.

Machine joystick: The machine joystick is the control mechanism of the turret. There is a take care of on the left end of the joystick and also the ideal side of the carriage box. The operator can easily manipulate the manage to regulate the primary shaft of the lathe to rotate ahead, reverse, or quit.

The transmission system of the horizontal lathe machine:

The straight turret is driven by a rack and also pinion: the power output by the motor is transferred to the primary shaft through a gearbox with a belt-drive, and also the handle settings outside the gearbox as well as the major shaft box are transformed to get different equipment readies to fit together, therefore getting different main shaft rates. Taihao Machinery is the business's major items with electromechanical pins for devices, rotating thimbles, lead screws, shaft machining, CNC lathe machining, device owners, chucks, and also chuck adapters. The pin drives the work piece to revolve through the chuck. At the same time, the rotation activity of the major shaft is transferred to the slide box via the reversing mechanism, exchange gears, feed box, and also smooth pole (or lead screw), so that the slide box drives the tool post to move linearly along the bed.


Comments

0 of 2000 characters used

All Comments (0)
Get in Touch